Neewer ST3 flexible overhead camera mount desk stand

Neewer ST3 flexible overhead camera mount desk stand

Mount your camera or other device overhead with the flexible Neewer ST3 flexible overhead camera mount desk stand. The ST3 is a flexible, adjustable support that can be attached to desks and other surfaces up to 6 cm thick. This versatile, articulating arm made from aluminium is compatible with cameras, LED lights, smartphones, and even shock mounts. The mount has a load capacity of 10 kg vertically or 5 kg horizontally. It comes with a 1/4"-20 screw at the top, plus 3/8"-16 and 5/8" screw adapters for additional compatibility. The triple-foldable design can be fully extended to a length of approximately 90 cm. You can adjust the angle of your camera or accessory with 360° rotation or 180° tilt.

This adjustable desk mount, made from black anodised aluminium, is incredibly sturdy. It has a diameter of 25 mm and a maximum load capacity of 5 kg when bent and up to 10 kg in a vertical position, which is 7.5 cm higher than comparable mounts. Ring lights and other devices are kept firmly stabilised during use.

Flexible arm mount: length per arm: 320 mm, fully extended length: 900 mm. The mount can be folded down to 350 mm for space-saving storage. The top and bottom of the stand can be rotated 360°. They can be positioned at an angle and locked using the knobs for flexible and effortless adjustment.

The stand comes with a 1/4 inch screw adapter, a 1/4 inch to 3/8 inch screw adapter, and a 3/8 inch to 5/8 inch screw adapter for ring lights, phone holders, cameras, webcams, projectors, and microphones across a variety of applications. Four cable ties are included for neat cable management.

The desk clamp is adjustable from 0 to 60 mm using the lower locking knob and fits a wide range of desks, dining tables, bedside tables, and kitchen worktops. The anti-slip rubber pads on the inside provide extra stability and protect your furniture from scratches.

The stand is simple to use: attach the C-clamp to the desk, mount the stand and adjust it to the desired angle, then tighten the clamp.